Xerox B205, Руководство по обслуживанию

Страница: 175 / 206

July 2019
6-16 Xerox® B205/B215 Multifunction Printer Service Manual
GP 1
Initial Release General Procedures / Information
Exit Diagnostic Mode:
1. Press the < Back/Exit > button on the top right of the screen, the Exit screen appears, Fig-
ure 5 .
Figure 5 Back to Exit screen
2. Select <Yes> to exit diagnostics and reboot the machine or <No> to exit Diagnostics only,
Figure 6 .
Figure 6 Exit Diagnostics
Procedure - B205 Diagnostics Mode (Tech Mode) Entry
Diagnostics entry for the B205:
1. On the B205 at the < Ready > screen, press in quick succession the keys: Menu , Back ,
Up , Down , OK , Stop , Menu to enter Diagnostics Mode.
2. At the [Tech Mode] screen, select [OK] .
3. Press the < Up > or < Down > keys to the scroll through the Diagnostics menu.
4. Press the < Ok > key, the following options are available:
• Data Setup
• Machine Test
• Report
• Exit Diagnostics
Exit Diagnostic Mode:
1. With [Tech Mode] on the top line of the display, press <Down> until [Exit Diag.] appears.
Select [OK] .
2. At [Exit Diag.?] screen, select [OK] .
3. At [Reboot Now?] screen, using <Up> or <Down> to choose whether to reboot the
device; select [OK] .
Refer to Section 6, Diagnostic Information for a listing of available functions within Diagnostics
Mode.
NOTE: Be Advised:
• After 30 seconds of inactivity, the selected diagnostics menu will time out and revert back
to the level to select Tech Mode or User Mode again.
• After 2 minutes of inactivity, the device will completely exit out of diagnostics