Xerox 2101, Руководство пользователя, Страница: 65 / 444

2.2 Loading Paper/Changing Paper Size of Paper Trays
35
Loading Paper
2.2.4
Loading Paper in Tray 7
The factory setting of the paper size is 8.5×11" or A4 portrait depending on your market area. You can
change the paper size to B5 portrait, A4 portrait, or 8.5×11" portrait.
Tray 7 is meant for loading paper to be used as separators when copying with transparency
separators or covers.
●
When adding paper to tray 7, remove any paper remaining in the tray, add it to the stack of paper to be added, then load all of
the paper into the tray at once.
●
For details on the type of paper can be loaded in tray 7, refer to “2.1 Paper to Use”.
Procedure
1
Load the paper, aligning to
the front side of the tray.
When changing the paper size:
(1)Remove any paper
from the tray.
(2)While gripping the
paper guide, shift it
back until the end.
●
Do not load different types of paper
in the tray. This may result in paper
jam.
● Do not load paper exceeding the
maximum fill line.