Xerox 2101, Руководство пользователя, Страница: 213 / 444

5.32 Copying Documents of Different Settings (Build Job)
183
Making Copies
3
If necessary, specify settings for Annotation, Output
Orientation, Covers , Separators , and Output/Finishing/Z
Fold .
When adding annotation:
The setting is applied to a whole job.
Select
Stamp , Date , Page Numbering or Set Numbering .
When specifying Output Orientation:
The setting is applied to a whole job.
Select
Auto , Face Up , or Face Up Reverse Order .
Only Auto is available when specifying Output/Finishing.
When adding covers:
The setting is applied to a whole job. Nothing can be copied onto the cover. The
number of covers can be set from 1 to 99 as required.
This cannot be set with the separators function.
When inserting separators:
You can insert a blank piece of paper as separator between segments. Nothing
can be copied onto the separators. The number of separators can be set from 1
to 99 as required.
When specifying Output/Finishing/Z Fold:
The setting is applied to a whole job.
If you add covers or insert separators, Y directions of the covers, separators,
and paper to be copied must be the same length.
For details about paper size for folding, refer to “5.7 Z-Folding”.
“5.28 Copying with Stamp or Date”
●
When you select On for Save to File
(at step 7), the file is saved facing
down even if you have selected any
option for Output Orientation.
“5.26 Copying With Covers”
“5.23 Inserting Transparency
Separators”
“5.26 Copying With Covers”
When there are stacks of documents that do not need separators:
Select Blank Covers of Covers on the Output Format screen for the first
document.
Then, select
No Covers of Covers for the stacks of documents that do
not need separators.