Xerox 2101, Руководство пользователя, Страница: 140 / 444

110
Making Copies
Added Features
Basic Features
Image Quality
Stored Job Templates
Output Format
5.9
Loading Documents in
Batches
This feature allows you to load documents in batches for copying with the same settings. You can load your
documents either on the document glass or in the DADF.
When
Next Original is selected on the screen that is displayed while scanning documents loaded in the
DADF, the documents will be scanned continuously even if Off is selected for HighDocVol .
Up to 50 sheets of documents can be loaded in the DADF at one time. If you have more than 50 sheets of
documents, divide them into batches for loading.
This section explains how to load your documents in batches in the DADF. Options available for this feature
are:
Off
Only one batch of document is used for copying.
On
To load documents in batches for copying.
●
You cannot load documents both on the document glass and in the DADF. If you used the document glass for the first batch of
documents, load the other batches on the document glass as well. The same goes for using the DADF.
●
Up to 1,000 pages of A4-sized pages can be loaded. However, depending on the document size, error messages may appear
before 1,000 pages are scanned. The same goes for selecting the High Document Volume feature during interrupt copying.
● The feature is set to Off at shipping from the factory.
●
The factory setting can be changed on the system administrator screen. For the setting change procedure, see “8.1 System
Administrator Mode”.
● A Screen will not be displayed during scanning if you load one set of documents without specifying any image feature and
setting
HighDocVol to On .
Procedure
1
Load the documents.
If you are using the DADF, do not load more than 50 sheets.
2
Select HighDocVol on the Basic Features screen.
The High Document Volume feature changes to On .
High Document Volume
“3.2 Loading Documents”
●
To cancel the High Document
Volume feature, select
HighDocVol
again.