Xerox 2101, Руководство пользователя, Страница: 154 / 444

124
Making Copies
Added Fe
atures
Basic Features
Image Quality
Stored Job Templates
Output Format
5.14
Specifying Image
Orientation
When you are using features like 2-Sided, Margin Shift, Edge Erase, Multiple Up, Image Repeat and
Independent X-Y %, you have to use this feature to specify the image orientation.
The setting for the image orientation will be the default set for these various features and which can be done on
each of the screen of these features. Options available for this feature are:
Head to Top
The head of the document is aligned with the top edge of the document glass or the DADF.
Head to Left
The head of the document is aligned with the left edge of the document glass or the DADF. Ensure that you
select
Head to Left when the document is loaded in this way.
●
When you are using the Bound Originals feature, the setting of Original Orientation does not matter: Head to Top will be set if
Left Page Then Right or Right Page Then Left is selected for the Bound Originals feature; and Head to Left if Top Page
Then Bottom is selected.
● The factory setting for Original Orientation is Head to Top .
●
The factory setting can be changed in the Tools Mode. For details, refer to “8.3 Setting Tools Mode”. However, when the default
setting is changed to
Head to Left , take note that the label and the display in the Tools Mode screen will be different.
Original Orientation
Place on document glass Load in DADF
Head
Top edge
Left
edge
Left
edge
Place on document glass Load in DADF
Top edge
Head