Xerox 2006NPC - DocuColor Color Laser, Руководство пользователя

Страница: 431 / 574

23. Tools Mode
Xerox DocuColor 2006 23–5
•
Color Mode: This option allows you to change the default setting for the
Original Type feature.
The Original Type default can be programmed to one of the following:
•
Black Text
•
Black Text/Photo
•
Black Photograph
•
Color Text/Photo
• Color Prnt Photo
• Color Photograph
• Auto
Setting a default value for the Color Mode feature is useful when most
originals are of the same type.
•
Output: This option allows you to change the default Output location for
copies.
The Output destination default can be set to the Exit Tray or the Top
Tray.
Media types other than Plain will automatically output to the Exit Tray, even if
Top Trap is selected. Additional output selections are available if the
Sorter/Stacker option is part of the configuration. Refer to Determining
Output with the optional Sorter/Stacker in the Copy Features section for
more information.
All paper fed from the Bypass Tray automatically outputs to the Exit Tray,
even if the Top Tray
is set as the default.
•
Erase: The option allows you to change the default measurements for
the Erase feature when it is on.
Each Erase dimension can be set at a value between 0 and 50 mm. The
new value is the default measurement for that dimension when the
Erase
feature is on.
The default setting for the Erase option is Off . Changing the dimensional
values does not set the default to On; it only changes the default
dimensional values when the Erase feature is switched on.