Xerox 2006NPC - DocuColor Color Laser, Руководство пользователя

Страница: 379 / 574

20. Using ColorWise Pro Tools
Xerox DocuColor 2006 20–7
Editing Profiles
Color Editor allows you to create custom profiles by editing existing simulation
or output profiles and saving the changes as a new profile. With Color Editor,
you can fine-tune a profile on your Fiery to meet your exact specifications.
You cannot edit source profiles; only simulation and output profiles can be
customized.
Color Editor has two Edit Modes for editing output profiles.
•
Custom – Use Custom to edit output profiles and save customized
versions of them.
• % Density – Use % Density to view the calibration target, which is one
component of the output profile. You cannot make changes to the
calibration target in this window, but you can import a new target.
Color Editor also has three Edit Modes for editing simulations.
• Master – Use Master mode to create a custom master simulation that
affects all print jobs to which it is applied, unless a linked simulation
exists for the selected combination of simulation profile, simulation
method and output profile.
•
Quick or Full – Use Quick or Full mode to create custom linked
simulation. Linked simulations affect the print job only if the
corresponding simulation profile, simulation method, and output profile
are selected. If you choose an output profile and simulation method for
which you have created a custom linked simulation, that simulation is
applied automatically to the job. If you choose a simulation method or
output profile for which there is no custom linked simulation, then the
master simulation is automatically applied.
Quick applies one-dimensional transfer curves that adjust output density
only, while Full provides a more complete and accurate simulation by
applying colorimetric transformations that adjust hue as well as output
density.
If you made edits to a master simulation after you created a linked simulation,
the edits are not applied to the linked simulation.
To Edit a Simulation Profile in master Mode or an Output Profile in
Custom Mode:
1. Launch ColorWise Pro Tools and click Color Editor.
2. Choose Simulation or Output from the View pop-up menu.
Simulation lists the simulation profiles resident on the Fiery, and Output
lists the output profiles resident on the Fiery.
3. Choose a profile to edit and click Select.
You can also open the Profile Manager, select a profile, and click Edit.