Xenics Manx-512 SQ CXP 130, Руководство пользователя

Страница: 27 / 73

User Manual
Manx-camera
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third
party without written permission from Xenics.
Xenics nv T +32 16 38 99 00 Doc Ref: ENG-2019-UMN005
Ambachtenlaan 44 F +32 16 38 99 01 Issue: R003
BE-3001 Leuven

Belgium www.xenics.com Date: 15/05/2020
XF-104_03/20-12-2012
Page 27 of 73
Line and frame triggers can be configured as shown below:
Trigger in source configurations
Frame trigger
Free
running External
trigger 1 External
trigger 2
CoaXpress
Line
trigger
Free running x x x x
External
trigger 1
x x x
External
trigger 2
x x x
CoaXpress x x x
Table 5-7 Trigger in source configurations
Lines(frames) can be generated in the following modes:
Line(frame) trigger in polarity configuration
Trigger in
sensitivity
Trigger in
polarity
Edge Low-falling Lines(frames) are generated when the trigger in voltage
polarity is falling
High-raising Lines(frames) are generated when the trigger in voltage
polarity is raising
Level Low-falling Lines(frames) are continuously generated when the
trigger in voltage polarity is low
High-raising Lines(frames) are continuously generated when the
trigger in voltage polarity is high
Table 5-8 Line(frame) trigger in polarity configuration
Skipping of triggers and trigger in delay can be adjusted. This is how it is shown on Xeneth
user interface.
Do not apply voltages to the trigger out wires as this will damage the camera!
!