SmartPad LCD
Page:
49
© 2003 Xantech Corporation
Section 6: Options Settings
Under the OPTIONS Tab in the Dragon Drop-IR (SPLCD) Software, the user can change the default settings
for RC68 Code Group, Bank Track Code Group, STATUS Line and LED Operation, Backlight Control, Display
Orientation, and RS232 Port Settings.
Figure 31 –
SPLCD Options Settings
RC68 CODE GROUP
The RC68+ Code Group setting refers to the group of IR codes that will be used to trigger RC68 Sequences as
discussed in Section 5. The number associated with this Code Group refers to the
dial setting
on the rear of the
RC68+ handheld programmer (See
Figure 32
below). The Default Code Group the SPLCD will respond to is
C9
. This setting only needs to be changed if numerous SmartPad LCD™ Panels or if there is an IR code group
conflict with some other device used in the same system.