Page: 64
SmartPad LCD
© 2003 Xantech Corporation
Placing the Volume Bar:
1. Right-click on a blank area of the background and select
Insert MRC88
Object
from the drop-down menu.
2. Choose from Horizontal or Vertical Volume bar.
3. Place and resize to desired position.
Creating Transparent GTL’s over Volume Bar:
1. Right-Click on a blank area of the background and select Insert Object
– Insert Transparent Button from the drop-down menu.
2. Resize the box to cover 1/3 of the volume bar and place over the
bottom 1/3 of the Volume Bar.
3. Place 2 more Transparent GTL boxes over the middle and upper 1/3 of
the section of the Volume Bar
Assigning the Proper RC68 IR Codes to the Transparent GTL’s
1. Click on Palettes and select RC68 Command Palette from the menu.
2. Click on the OPTIONS Tab on the Virtual RC68 Palette and choose
MRC88 from the Xantech Model drop-down menu.
3. Click on the PALETTE Tab on the Virtual RC68
4. On the SPLCD Systems window, select the Transparent GTL placed
on the lower 1/3 of the Volume Bar.
5. Select the [80] button from the Virtual RC68 Palette (under the
Command List Window you should see the command ‘A(Xantech-
MRC88)A,A8’ )
6. Repeat steps 4 and 5 for the Middle and Hi level Transparent GTL with
the RC68 [48] and [10] commands as shown above.
IMPORTING CUSTOM BACKGROUNDS:
Importing Pictures as
Custom Backgrounds:
This is easiest performed on the SPLCD64G and SPLCD64V units due to
increased screen resolution (640x480).
Use the following guide lines when importing user-defined Bitmap images,:
Transparent GTL
placed over MRC88
Volume Bar
RC68 Trigger
Command