SmartPad LCD
Page:
63
© 2003 Xantech Corporation
1. Within DragMRC Software, select the Zone Keypad the SPLCD will be
connected to.
2. Click on RC68 on the lower right of the MRC88 Systems Window
3. Click on Palette and select MRC Amplifier Command Generator.
4. Click on the Drop-Down arrow and select Zone Volume Command.
5. Select the Zone # (in this case Zone #1)
6. Select the [80] button on the Virtual RC68 (or any other free RC68
Trigger button).
7. Select a discrete Volume Level for the LOW setting (i.e. 20) and select
APPLY.
8. Repeat for two other RC68 trigger buttons for a Mid Volume level and a
Hi Volume Level (i.e. place discrete volume level 40 command under
button [48] and discrete Volume level 50 under button [10] on the
virtual RC68.
Configuring SPLCD in Dragon Drop-IR SPLCD: