Xante Accel-a-Writer 3 Series, Руководство пользователя

Страница: 80 / 320

3-42 Macintosh Setup bb ____________________________________
1. Open XANTÉ Command Center if necessary; then, select
General: X-ACT. The More X-ACT Calibration window
appears (fig. 3.19).
Fig. 3.19 More X-ACT Calibration Window
2. Make sure that the same type of media you will use for final
printing is loaded in the printer.
3. Select a setting for the media type you are using from the
Media Type drop-down menu (fig. 3.20).
Fig. 3.20 Media Types Menu