Xante Accel-a-Writer 3 Series, Руководство пользователя

Страница: 36 / 320

2-26 Installation bb _________________________________________
2. Connect the printer to the appropriate port for the cable used
on your network.
Fig. 2.31 Connect to the UTP Port
Fig. 2.32 Connect to the Coaxial Port
Before using your printer, set it up for your network environment and
configure the Ethernet interface. See chapter 5 for details.
Connecting the Power Cord
1. Make sure the printer’s power switch is off (the
O
is pressed in).
2. Connect the power cable’s female connector to the back of the
printer and the male connector to a standard electrical outlet
(fig. 2.33).
Warning: Plug the printer into a dedicated, properly grounded AC
outlet. Do not use an extension cord. Use a surge
protected outlet to help prevent power source fluctuations
from damaging your printer.