Xante Accel-a-Writer 3 Series, Руководство пользователя

Страница: 114 / 320

4-26 PC Setup bb __________________________________________
D.ps contains a Control-D (PostScript’s end-of-job marker) for use
with applications that do not send a PostScript end-of-file.
Fonts.ps3 prints a list of Adobe PostScript 3 fonts resident on
XANTÉ PostScript 3 printers.
Fontsamp.ps3 prints samples of Adobe PostScript 3 fonts resident
on XANTÉ PostScript 3 printers.
Ftp.ps prints instructions for uploading and downloading files to
XANTÉ’s FTP (File Transfer Protocol) site.
InitdskX.ps files are used to initialize hard disks attached to or
installed in your printer.
• Numbered files initialize the SCSI disk with the same device
number (Initdsk1.ps initializes SCSI disk #1, Initdsk2.ps
initializes SCSI disk #2, etc.) on the printer.
• Initdska.ps and Initdskb.ps initialize the internal IDE drive of the
same designation (the A or B disk) on the printer.
• Initdsks.ps initializes all SCSI and IDE drives attached to the
printer.
A hard disk must be initialized before it can be used to store
downloaded fonts or to set up a spooling queue. Initializing a disk
erases all information stored on that disk.
Novell34.ps prints instructions for setting up a XANTÉ printer on a
Novell network.
Parmdump.ps prints a list of current settings for the communication
devices configured for your printer.
Set_ip.ps allows you to set your printer’s IP address. Open the file in
a text editor and change the IP address in the parentheses to your
printer’s IP address. Save the file, and download it to your printer.
The printer must be restarted before the change is effective.