Xante Accel-a-Writer 3 Series, Руководство пользователя

Страница: 260 / 320

10-12 Options bb __________________________________________
5. Make sure the printer displays a
PLEASE WAIT
or
READY/IDLE
message; then, turn off the printer and
disconnect the power cord from the power supply (fig. 2.6).
6. Remove all media from the multipurpose feeder and the output
tray. Then, close the multipurpose feeder.
7. Remove all paper cassettes from the printer. Pull each cassette
out until it stops; then lift up slightly and remove it from the
printer (figures 2.16 and 2.17).
Warning! The printer weighs approximately 58.5 lbs (26.5 kg)
without toner, cassettes, and media installed. Always
have two people lift the printer using the recessed grip
areas on the right and left sides.
8. Attach the printer to the feeder using the following procedure.
Note: If a paper cassette feeder is to be used in addition to the
2,000 sheet feeder:
First , remove the cassette feeder from the printer, if
necessary. See “Removing the Paper Cassette Feeder” earlier
in this chapter.
Second , attach the paper cassette feeder to the 2,000 sheet
feeder using the following procedure.
Third , attach the printer to the combined feeders using the
following procedure.
a. Lift the printer over the 2,000 sheet feeder and align the
two stubs on the feeder with the holes on the bottom of
the printer (fig. 10.10).