Xante Accel-a-Writer 3 Series, Руководство пользователя

Страница: 113 / 320

___________________________________________ PC Setup 4-25
PDFs Folder
This folder contains PDFs (Printer Description Files) for each XANTÉ
printer. QuarkXPress versions prior to 3.3.2 require these files in
addition to the PPD. Use these PDFs to ensure the highest quality output
from your printer and QuarkXPress.
The XANTÉ Utilities Installer loads the QuarkXPress PDF. To load
these PDFs manually
1. Load and configure the Adobe PostScript printer driver and
your printer’s PPD following instructions in “Adobe PostScript
Printer Drivers” earlier in this chapter.
2. Copy the XANTE_3S.PDF for the series 3 printers from the
PDFs folder to the Xpress\PDF directory on your PC by typing
the following command, substituting the drive letter containing
the XANTÉ Utilities CD-ROM for [Drive].
COPY [Drive]:\PDFS\XANTE_3S.PDF C:\XPRESS\PDF
↵
See the QuarkXPress section in the appendix for additional
information.
PS_Files Folder
This folder contains Adobe PostScript files to help setup and maintain
your printer and a PDF file, Overview.pdf, which describes these files.
These files can be downloaded to your printer using Send PostScript
File in XANTÉ Command Center (see “XANTÉ Command Center”
later in this chapter) or by typing the following DOS command,
substituting a different port, if necessary:
COPY FILENAME.PS LPT1
↵
Clean.ps prints cleaning instructions for the Accel-a-Writer 8100,
8200, and PlateMaker II.