X-FIRE 1200 Limestone, Инструкция по установке и эксплуатации

Страница: 46 / 48

630140_1 XFIRE_1200_GB _Service_R ‐ em otion
1.0 Isolate Power and Gas Supply:
Before any service and mainte nance work is done on the fire, the gas supply must be
isolated or shut off. Gas can be isolated by eith er turn ing the gas off at the cylinders,
at the meter or at the appliance isolation valve. Power can be isolated by removing
the batteries from the battery pack.
2.0 Remove the Facia:
Ensure the facia has cooled befo re attempting to remove it.
The facia attaches to the fire by four hooks. To remove the facia, simply lift it
upwards 15 ‐ 20mm, and pull towards you. Care shou ld always be taken when
handling the facia.
3.0 Remove Glass Assembly:
Ensure the glass assembly has cooled completely befo re attempting to remove it.
Pull the four hooks shown belo w towards you and then away from the glass to
release the glass fram e undern eath the hook. Lift the glass assembly towards you to
clear the locating supports and place it flat upon some newspaper or a sheet of
cardboard to protect your floor coverings