WYTRON CD-398, Руководство по эксплуатации

Страница: 36 / 58

36
to use on-the-fly direct copy while there is a hard drive
installed. This setting will appear only if there is a hard
drive installed. Press MODE switch to change setting and
GO to bring you to next setting.
6.1.22 HDD Partition Size (if HDD installed)
This setting defines the partition size that created on
connected hard drive by controller card itself. Any hard
drive connected on Wytron’s controller card will be
partitioned by controller card itself and end-user needs not
to pre-arrange any additional process on the hard drive.
User just needs to connect the hard drive on the Wytron’s
controller card and then the controller card will handle the
partition job automatically. All the data stored in hard drive
before connecting on controller card will be erased and
overwritten after connection on the controller card and
end-user must avoid of using such hard drive with valuable
data in it.
There are total four option settings under this function
which are Auto (default setting), 850M, 4.8G and 9.6G. The
default setting of this function is Auto which will handle the
partition size by controller card itself during drive detection
when booting. If controller card finds no DVD writers in the
connected drives, the 850M of partition size would be
chose. If there are DVD writers detected by controller card
and the first of them supports the DL (Double Layer), the
9.6G of partition size would be auto-selected. But if this
first detected DVD writer only supports the single layer
DVD, the 4.8G partition size would be used, instead of
9.6G.
When the Auto is set in this function, there is a potential
danger for end-user which needs to be taken care of.