WYTRON CD-398, Руководство по эксплуатации

Страница: 22 / 58

22
5. Main Function
Main functions explained below (Copy, Copy+Comp, Compare,
etc.) are based on factory’s default setting. Different settings
will cause duplicator to react differently. Please press and keep
holding down the MODE switch while turning on the power till
the “clear setup” message is shown on the LCD; the duplicator
will return to factory’s default setting as a reset.
5.1 Copy
Make sure the present partition in hard drive is correct and
contains data (with hard drive installed) or the master disc
is loaded in the CD/DVD-ROM drive (without hard drive
installed) before copying. Place blank CD/DVD discs into
the writers, when all writers detect the CDs/DVDs,
duplicator will start copying automatically. When fewer
copies are required, place the required number of blank
CD/DVD discs into writers. Till you see a number “X” of
“X”start which matches the number of disc placed in the
writer(s), press the GO switch manually to start the
duplication.
When Copy is finished, those discs passed will be ejected
automatically and failed ones will be remained in writers.
Press MODE switch to eject failed discs. Put new
CDs/DVDs in the writers for additional copy. Duplicator can
also copy rewritable discs containing data if the writers are
capable of writing the rewritable discs. Data stored in
rewritable discs will be quickly erased automatically before
copying new data, no special setting or procedure required
to erase the old data.