WYTRON CD-398, Руководство по эксплуатации

Страница: 18 / 58

18
AA. With hard drive installed
a. Duplicator will automatically detect the hard drive and
create partitions for it (each partition will have 850MB
capacity for CD duplicator, e.g. 40 GB Hard Disk will
probably have 44 partitions. For DVD duplicator, 4.8GB
or 9.6GB for each partition.)
b. You can select partition in the “hdd partition group”
function in Setup Menu.
c. If there is no data stored in present / selected partition of
hard drive, press the MODE switch to select “Load”
function and place the master disc into the
CD/DVD-ROM drive which will automatically detect the
master, analyze and load data into the present / selected
partition. The master disc will be ejected when loading is
completed. In case of error, the LCD will show “error”
and the master disc will also be ejected automatically.
Change another master disc for loading. Master data can
be stored in different partition, switch to that particular
partition (Please refer to hdd partition group) for loading.
d. Switch to Copy by pressing MODE switch. Place blank
CD/DVD discs into all the writers. Duplicator will start
copying when all writers detect the discs. If you do not
need to use all writers for copying, the LCD display will
display the number of CD disc detected as “ Xstart” (X
represents the number of writers with detected discs that
are ready to copy). Press the GO switch and operation
will start instantly. There is no limitation on number of
discs to be copied in one round (Vary on different model,
CD-398/DVD-399 will be 9 pcs. in maximum targets. For
DVD-299 controller card, there will be three targets in
maximum.) or there is any limitation on sequence of
writer to start with. In other words, you may copy one
disc only using any one of the writers randomly.