WYTRON CD-398, Руководство по эксплуатации

Страница: 37 / 58

37
When the CD writers are originally connected on Wytron’s
DVD controller cards, with hard drive installed, the 850M
partition size would be used. If user installs a DVD writer
suddenly for testing purpose, the hard drive would be
re-partitioned automatically by 4.8G or 9.6G, depending on
the DL or SL supported on this DVD writer. Under this
situation, the original data stored in the hard drive (by
default 850M partition size) would be vanished due to
re-partitioning. If there are important data stored in the
original partitioned hard drive, end-user must switch the
setting of this function manually to 850M or other setting to
fix the partition size in order to avoid of changing for the
partition size by controller card due to different writers
installed in system.
After selection, if partition size is changed physically, the
changing will be effective immediately when quitting of this
function and the end user needs not to reboot the system.
When leaving this function, the controller card will show
you the message of “Partition Size is xxxxx, Total yyyy
parts.” The xxxxx is the current selected partition size of
this system and there will be total yyyy partition number in
the hard drive.
6.1.23 Hdd Partition Group (if HDD installed)
This setting assigns the current working partition group on
hard drive, if HDD installed. Press MODE switch to change
the setting and press GO to exit. After selecting the
partition group, press exit button will bring you to the next
sub function as “Hdd Partition of X” for more selection of
the partition number in that group (X represents the
partition group you selected previously). After choosing the
partition number, press the exit button will bring you back
to Copy function located in the main menu.