WYTRON CD-398, Руководство по эксплуатации

Страница: 27 / 58

27
6. Sub-function
In main menu, press and keep holding down the MODE
switch for more than five seconds till the da-da-da sound
heard from the controller, the menu will be switched to sub-
menu and vice versa.
6.1 Setup
As there are different settings under the setup function to
control the duplicator’s operation, we suggest using the
original default settings for optimal operation. Changes
should be made only when you are fully familiar with the
function. Also please be noted that the function settings
listed below are summary for all possibility of devices
installed and might not exist in your duplicator.
6.1.1 Start Writers
This setting controls the number of writer that will work in
duplicator and normally it should be equal to the number of
writers installed in duplicator. Number of writers set is less
than that actually installed will limit the working writers. If 5
sets of writer are installed, for example, number setting of 2
will allow using only two writers at one time. Duplicator will
start the operation instantly when any 2 of the 5 installed
writers are ready (disc detected). The rest 3 writers will be
idle.
Press MODE will change the setting and press GO to bring
you to next setting.