WYTRON CD-398, Руководство по эксплуатации

Страница: 45 / 58

45
and press GO switch to quit.
e. When “End track” is displayed on the LCD, press
GO switch to quit directly since the number shown
is already 2.
f. Press MODE switch to number 5 at “Begin track”
and press GO to quit.
g. When “End track” is displayed on the LCD, press
GO switch to quit directly since the track number
shown is already 5.
h. Press MODE to number 7 at “Begin track” and quit.
i. Press MODE switch to number 13 at “End track”
and quit.
j. Press GO switch directly to following “Begin track”
and End track” selection to finish the track
selection on No. 1 master disc.
k. The next function will be Finalize setting. Since
there is still another master to be selected from,
leave the option as No and press Go to quit.
l. Duplicator will start to copy those tracks you
selected just now onto blank target discs in writers.
m. After copy is finished, duplicator will eject master
and show “Pass” on LCD but those un-finalized
discs will still be remained in writers for further
operation.
n. Load No.2 master in ROM drive and continue to
select from second master.
o. Repeat steps (d) to (k) above but change the
Finalize setting to Yes in (k) and the duplication for
tracks selected will then begin.
p. When copy is finished, the passed discs will be
ejected from writers directly.
q. If total capacity of selected tracks exceed the max.
capacity on the detected blank discs, the
duplicator will refuse to accept additional track
selection.