Wyse Winterm 3200LE, Руководство администратора

Страница: 42 / 352

10
Terminal Installation
1. Connect the monitor to the Video connector.
2. Connect the keyboard to the Keyboard connector.
3. Connect the mouse to the Mouse connector.
4. If you will be using a network connection, connect a 10Base-T or 100Base-T
network cable to the Network connector. Depending on your configuration
needs, connect a printer to the parallel port, and/or connect a modem/server
serial cable or serial device to the serial ports, as appropriate.
5. Connect the power supply output cable to the Power connector.
Caution
Do not force a connector into its socket. If any undue
resistance is encountered, ensure that the connector is
oriented correctly to the socket.
6. Plug the AC cord into the power supply, then into an AC outlet.
7. After the cables are connected, install the terminal in its planned location, either
on a desktop or, optionally, mounted to a wall.
Mounting the Terminal
The terminal can be freestanding or attached to a wall (an optional wall mount kit is
required). Instructions for mounting your terminal are provided in the following
paragraphs; use the instructions that are appropriate for the desired method of
mounting your terminal.
Freestanding Desktop Mounting
The terminal is shipped with a desktop mounting stand attached so it can
immediately be put into desktop operation. The mounting stand is weighted and
equipped with non-skid feet. A single screw attaches the mounting stand to the
terminal housing. The following figure shows the terminal mounted on the desktop
mounting stand.