© Copyright 2018 WyreStorm Technologies |
Enado Installation Manual | 180913
34 of 38
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
Email:
Preferences Menu
Controller preferences can be adjusted to enable or disable specific features of Enado. Navigate to the Application menu and
select Preferences to make the following adjustments:
Timezone
Allows Enado to report accurate time based on location. Correct timezone is
required when programming timed commands.
Editor Password
Enabled: Enado will prompt for a password when logging into the configuration
UI.
Disabled: The configuration UI will not be password protected
Remote Access
Authentication
Enabled: Enado will prompt for a password if remotely accessing the interface.
Disabled: Enado will not prompt for a password if remotely accessing the
interface.
Control UI Settings
Icon
Enabled: A settings icon will appear in the control UI and will be accessible to the
end-user, allowing limited settings to be adjusted outside of the configuration UI.
Disabled: No settings icon will appear in the control UI
Single Zone Link
Enabled
: Will show a project’s Zone/Room button when there is only a single
Zone/Room
Disabled
: Will not show a project’s Zone/Room button when there is only a
single Zone/Room and will automatically log the end-user into the Activity
selection page.
Single Activity Link
Enabled
: Will show a project’s Activity Button page even if there is only a single
Activity Button.
Disabled
: Will not show a project’s Activity Button page when there is only a
single Activity Button and will automatically log the end-user into the Activity.
*Requires the Single Zone Link to be disabled.
Zone Terminology
Enter in customer “Zone” naming. This name will appear at the top navigation
bar in the control UI.
