© Copyright 2018 WyreStorm Technologies |
Enado Installation Manual | 180913
19 of 38
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
Email:
Viewing and Testing Commands
The Device Command Creator is the home for accessing, editing and testing commands. This tool hosts many features
including:
Command Data
–
Choose a Manufacturer > Device >
Command to view or edit a
command’s data.
Data Format Guide - lists the appropriate syntax for
different formats of commands, including carriage return,
line feed and delimiter information.
IR Learning - accomplished by clicking the Start Learning
button and pointing an IR remote at either the IR RX on the
front panel or by plugging an IR RX cable in to the IR IN
port at the rear panel.
Please note: IR Learning is only possible on the ENA-001-
010. WyreStorm cannot guarantee accuracy of learning IR
commands due to varying environmental factors which
can inhibit Enado’s ability to receive correct data.
Testing Commands
1.
Select the command to be tested by choosing
Manufacturer > Device > Command
2.
In the Testing section click the Set Test Outputs
button and ensure that the appropriate I/O of Enado is
selected
3.
Click the Test Command button
