© Copyright 2018 WyreStorm Technologies |
Enado Installation Manual | 180913
14 of 38
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
Email:
Configuring Control (IR, IP, RS232)
Controlling an Ethernet Device
There are two methods for adding and controlling Ethernet enabled devices, perform the following:
1.
Navigate to the Tools Menu and select I/O Connectivity Settings
2.
Select the “Add Ethernet Device” button located at the bottom right of the UI.
3.
Method #1
–
Detect Devices
a.
Press the Detect Devices button for Enado to scan the local area network.
b.
Select the Ethernet device you wish to control from the populated list and press Add Selected.
c.
When prompted provide the IP protocol and port number required from the Ethernet device. If you have previously
downloaded control commands for the Ethernet Device through the Enado Command Library, protocol and port
information may be available by selecting from the Device Libs drop down menu.
