© Copyright 2018 WyreStorm Technologies |
Enado Installation Manual | 180913
32 of 38
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
Email:
You will now need to link the Amazon Echo to the Enado controller. Follow the below dialog steps to successfully create the link.
User Dialog
Alexa Response
“Alexa, open Enado”
Hello, how can I help?
“Register voice service”
Please tell me your voice service code, starting with “
Service
code
…”
“Service code {123 456}”
(replace with service code generated by your Enado
controller)
Please tell me device
’s
location by starting with “Device in…”
“Device in {room}”
(name of room in Enado project a voice command exists
within)
Congratulations, device has connected to {room} voice service
.
Repeat the above dialog for additional rooms that have voice commands. When finished, you can execute any voice commands you
have created.
Example Command #1
Alexa Response
“Alexa, open Enado”
Hello, how can I help?
“Turn on Living Room TV”
Ok, anything else?
“Start Netflix”
Ok, anything else?
“No”
-
Example Command #2
Alexa Response
“Alexa,
tell Enado to turn on Living Room TV
”
Ok
Example Syntax
“Change channel to {num}”
“Change {device} channel to {num}”
“Change {device} channel to {num} in {room}”
“Set temperature to {num}”
“Set {room} temperature to {num}”
“Enter {room}”
“Control {device}”
“Control {device} in {room}”
To view a compiled list of all voice commands created with respective Rooms, Activities and buttons navigate to Project>View/Print
Voice.
