WTI PollCat NetLink NLJ-VIP Скачать руководство пользователя страница 141

Страница: 141 / 266

14-1

14. Scheduled Actions

Scheduled Actions are generally used to retrieve data from the VIP

according to a user-deﬁned time table. Typically, the VIP will contact

your PC at the scheduled time and day, and then automatically download

collected data.
In addition to its data collection function, the Scheduled Action feature

can also be used to perform other tasks, such as Wellness Checks, Contact

Switch operations, and etc. The VIP allows a great deal of ﬂexibility in

conﬁguration of the Scheduled Action feature. The unit can perform any of

the following actions according to the user-deﬁned schedule:

•

Callout:

The VIP will contact a remote PC via modem, and execute

a series of user-deﬁned commands. Although these commands are

usually employed to download data, they can also report memory

conditions, alarm status, and etc.

•

Page:

The VIP will dial an alphanumeric pager and send a user-

deﬁned message. This allows the VIP to perform a wellness check, or

inform system managers that the unit is operating properly.

•

SNMP Trap:

The VIP will send an SNMP Trap to a network manager.

This option can also be used to perform a wellness check, or notify

personnel that it is time to check the unit.

•

Console Port:

The VIP will contact the device connected to its

Console Port in order to download data or report status.

•

Email/Text Message:

The VIP will send a text message or email to

either or both user deﬁned addresses.

•

Output Contact:

(Optional - Not Available on NLJ-VIP units) The

NetLink-VIP will open or close the optional Output Contact switches.

Each of the two available schedules allow up to seven scheduled actions

per week. This provides a total of fourteen events per week. For more

information on these actions, please refer to Section 13.

Содержание PollCat NetLink NLJ-VIP











































































































































































































































































Результаты поиска

Содержание PollCat NetLink NLJ-VIP

Отзывы:

Похожие инструкции для PollCat NetLink NLJ-VIP

Бренды по названию

Популярные бренды

WTI PollCat NetLink NLJ-VIP, Руководство пользователя

Результаты поиска

Содержание PollCat NetLink NLJ-VIP

Отзывы:

Похожие инструкции для PollCat NetLink NLJ-VIP

Бренды по названию

Популярные бренды