WTI PollCat NetLink NLJ-VIP, Руководство пользователя

Страница: 148 / 266

15-4
PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
3. Before invoking Command ^B99, make certain the command echo is
disabled at the command port which will drive the download. If the
command echo is enabled when Command ^B99 is invoked, the ^B99
command will be included in the file with the saved parameters. This
will cause problems when the file is uploaded to the VIP unit,
a) The Command Echo is enabled/disabled using the Port
Configuration Menus as described in Section 5.4.
b) If desired, the command echo can also be temporarily suppressed
by entering the ^A character in place of the ^B character
(e.g.
^A99
). Note that this method can also be applied to other
^Bxx commands to temporarily suppress the command echo.
4. Invoke command ^B99. From any VIP command menu, type
^B99
(or
^A99
) and then press [Enter] . VIP parameters will be sent to
the polling device, where they will be saved to the ASCII filename
selected in Step 1.