manualshive.com logo in svg

WTI PollCat NetLink NLJ-VIP, Руководство пользователя, Страница: 220 / 266

Поделиться
Скачать
WTI PollCat NetLink NLJ-VIP Скачать руководство пользователя страница 220

19-20

PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide

^B66  Enable / Disable Time / Date Stamp

(Supervisor Mode Only)

 Enables the time/date stamp option for each input 

port.  The time/date stamp will be inserted at the beginning of each record, 

prior to storage in the VIP's memory.  This command uses the  

following format:

^B66[,port][,action]

  

[Enter]

Where:

,port

 

Input Port:  If this argument is omitted, ^B66 will enable or  

 

disable the time/date stamp for PBX Port A.  Offers the  

 

following options:

 

,A

 

PBX Port A 

(Default)

 

,B

 

PBX Port B (not available on NLJ-VIP)

 

,X

 

AUX Port (not available on NLJ-VIP)

 

,I

 

PBX IP Port

,action

  Enable / Disable:  Offers the following options:

 

,1

 

Disable Time/Date Stamp 

(Default)

 

,2

 

Enable Time/Date Stamp

 

,3

 

Enable Long Format Time/Date Stamp

Corresponding Menu Function:

  Port Configuration Menus, Item 11.

^B67  Set Auto Delete Option

(Supervisor Mode Only)

 When data is released to the polling device, the 

Auto Delete option can automatically erase each data block from the VIP 

memory after reception is acknowledged.  Note that this command will only 

effect the port that invoked the command.

Command Options:

^B67,1

  Disable Auto Delete Option 

(Default)

^B67,2

  Enable Auto Delete Option

Note:

  Before enabling the Auto Delete Option, please refer to the 

cautions listed in Section 16.6 of this User's Guide.

Corresponding Menu Function:

  Port Configuration Menus, Item 26.

^B68  Set Command Echo

Enables / Disables the command echo function.  When enabled, commands 

sent to the VIP will be echoed back to the polling device.  Note that this 

command will only effect the port that invokes the command.

Command Options:

^B68,1

 

Disable Command Echo

^B68,2

 

Enable Command Echo 

(Default)

Corresponding Menu Function:

  Port Configuration Menus, Item 11.

Содержание PollCat NetLink NLJ-VIP











































































































































































































































































Отзывы:

Нет отзывов