WTI PollCat NetLink NLJ-VIP Скачать руководство пользователя страница 132

Страница: 132 / 266

12-4

PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide

Output Contacts:

The open/close action that will be performed when

an Output Contact action is generated by this alarm. A "C" indicates

the contact will be closed, "O" indicates the contact will be opened,

a dash (-) indicates the status of the contact will not be changed.

(Default = No Action.)

10.

Message:

The message that will be sent when a Callout,

Alphanumeric Page, SNMP Trap, Console action or Email/Text

Message is generated by this alarm.

(Default = undeﬁned.)

11.

Auto Execute:

If enabled, the VIP will execute the command string

deﬁned under item 11 when a Callout or Console action is generated

by this alarm.

(Default = Off.)

12.

Execute Commands:

Deﬁnes the command string that will be

performed if Auto Execute is enabled, and a Callout or Console Action

is generated by this alarm. This command string consists of a series

of ^Bxx commands, with each command separated by a backslash

and forward slash character (\/). ^Bxx commands are discussed

in Section 19. For more information, please refer to Section 13.3.

(Default = undeﬁned.)

Example:

To send the Site ID Message and then send all

alarm records, the Auto Execute String would be deﬁned as

\/03\/01,ALM

Notes:

• When the Auto-Execute string is deﬁned, commands are entered

without the ^B character, and each individual command is

separated by a slash character.

• In order for the Auto Execute feature to function, item 10 must be

enabled, the command string must be deﬁned under item 11, and

the Alarm Action must be set at either Callout or Console.

13.

Email To:

This item is used to select the recipient(s) for emails

that are generated by this alarm. The submeu for this prompt allows

you to select both, either or none of the two email recipients that

are deﬁned via the Send Email Conﬁguration Menu, as described in

Section 5.4.5.1.

(Default = Email #1.)

Содержание PollCat NetLink NLJ-VIP











































































































































































































































































Результаты поиска

Содержание PollCat NetLink NLJ-VIP

Отзывы:

Похожие инструкции для PollCat NetLink NLJ-VIP

Бренды по названию

Популярные бренды

WTI PollCat NetLink NLJ-VIP, Руководство пользователя

Результаты поиска

Содержание PollCat NetLink NLJ-VIP

Отзывы:

Похожие инструкции для PollCat NetLink NLJ-VIP

Бренды по названию

Популярные бренды