WTI PollCat NetLink NLJ-VIP Скачать руководство пользователя страница 137

Страница: 137 / 266

13-5

Alarm Actions

13.2.6. Output Contact

If the "Output Contact" action is selected, the VIP can open or close the

optional Output Contacts when an alarm is generated.

Notes:

• In order to use the Output Contact action, the Idle/Non-

Alarm state for each contact should be deﬁned as described in

Section 12.

• The Output Contacts are an optional feature, and are not

available on NLJ-VIP units.

When the Output Contact action is selected, the following item must be

deﬁned at the conﬁguration menu for the speciﬁed alarm.

•

Output Contacts:

Specify the target Open/Closed/No Change action

for each contact. When an alarm is generated, the Output Contacts

will be opened or closed as speciﬁed.

13.2.7. Console

If this action is selected, the VIP will send a message via the Console Port

when an alarm is generated. Typically, this message describes the type

of alarm event that occurred. The VIP can also execute a user-deﬁned

command string to report status or download data.

Note:

In order to use the Console action, Console Port

communication parameters must ﬁrst be deﬁned as described in

Section 5.4.3.

When the Console action is selected, the following items should be deﬁned

at the conﬁguration menu for the speciﬁed alarm.

•

Message:

(Optional) Enter a message to describe the type of alarm

event that occurred; for example "80% FULL".

•

Auto-Execute:

(Optional) Enable or disable the Auto-execute

function and then deﬁne the command string at the "Execute

Commands" prompt. Auto Execute command strings are discussed

further in Section 13.3.

Содержание PollCat NetLink NLJ-VIP











































































































































































































































































Результаты поиска

Содержание PollCat NetLink NLJ-VIP

Отзывы:

WTI PollCat NetLink NLJ-VIP, Руководство пользователя, Страница: 137 / 266

Результаты поиска

Содержание PollCat NetLink NLJ-VIP

Отзывы: