Wolf Garten TRAC OHV 6, Инструкция по эксплуатации

Страница: 32 / 86

32
Maintenance
Danger
This toothed belt has to be adjusted correctly. If not, the blades may reach one another, thus damaging the belt and also the cut-
ting tools.
Danger
When hard objects are hit, the blade bolts will break, and so the toothed belt will get damaged! The toothed belt has to be examined!
The two blades have to be attached at right angles to one another.
(Fig. W8).
Spare Parts
Always only use parts made by the manufacturer.
Torque Data
Cutting Tools:
Trac toothed belt see Fig. W7
Blade bolts, left 50 Nm
Blade bolts, right 50 Nm
Housing bolts, M8x30 32 Nm
Stop nut, M12 (disk)
65 Nm
Hexagon socket-head bolt
M8x25 (arm of the revolving pulley)
25 Nm
Steering toothed gearing mechanism holder:
Bolt, M8x20 25 Nm
Locknut, M12 80 Nm
Engine transmission drive:
Exhaust silencer bolts 16 Nm
Crankshaft bolts 108 Nm
Bolt, M10x40 (guide rollers) 40 Nm
Locknut, M8 15-20 Nm
(Idler arm)