45
Figure 3.4-2 Working Period Setting.
1. Set alarm period, it can enable alarm event within the range of set period.
2. There are totally six periods to set every day, click the check box in front of the period, and then the period
can be valid.
3. Select week number (default is Sunday, if users select the whole week, it means setting can be applied to
the whole week; users can also select the check box in front of the day to make separate setting for some days).
4. Click
button after setup, return to motion detect page.
●
Set Area
Click
and you can set area in the interface shown in Figure 3.4-3
Different colors represent different areas. Each area can set different detection zones. Detection zone can be
irregular and discontinuous. Check detail in Table 3.4-2
Figure 3.4-3 Area Setting
