30
Step 4
, Click
to make config valid.
Use the IP host in the trusted sites to log in device WEB interface, which can realize successful device login.
3.2.2 Advance
3.2.2.1 SNMP
The SNMP (Simple Network Management Protocol) provides framework of bottom-layer network management
for network management system. It can control SNMP function in the network service setting. It can gain the
relevant config info after connecting to device via relevant software tool.
It needs to satisfy the following conditions if it is to use SNMP function:
● Install SNMP device monitoring and management tool, such as MIB Builder and MG-SOFT MIB Browser.
● Get two MIB documents which are corresponding to the current version from technical personnel.
Step 1
,
Select “Setup > Network > Advance > UPnP”.
The system will display the interface of
“SNMP”, which is shown in Figure 3.2-8 and Figure 3.2-9:
Figure 3.2-8 SNMP
Figure 3.2-9 SNMP V3
