42
Step 3
, Click
to check Zero Point Auto Calibration.
3.3.2.10 Time Task
Time task is to implement relevant movements within the set period.
Note
: It needs to set preset, tour, scan and pattern in advance.
Step 1
,
Select “Setup > PTZ Settings > Function > Time Task”.
The system will display the interface of “Time Task”, which is shown in Figure 3.3-11:
Figure 3.3-11 Time Task
Step 2
, Check
“Enable” to enable the function of time task.
Step 3
, It is to set the number of time task.
● Click
to delete all the time tasks which have been set.
Step 4
, Select time take action, you can select preset, tour, scan or pattern.
Step 5
, Select action number.
Step 6
, Set the time of auto home.
● Auto home time means the time it needs to take to auto recover time task when manually calling PTZ
and interrupting time task.
Step 7
, Click
to set the period of implementing time task.
Step 8
, Click
and select task number, then you can copy it to the task whose number has been
selected.
Step 9
, Click
to complete config.
3.3.2.11 PTZ Restart
PTZ Restart is used to restart the PTZ.
Step 1
,
Select “Setup > PTZ Settings > Function > PTZ Restart”.
