41
Figure 3.3-9 PowerUp
Step 2
, Check
“Enable” to enable PowerUp functions.
Step 3
, Select the types of PowerUp; you can select preset, tour, scan, pattern or auto.
Note
:
The system will implement the last action before the camera’s power is cut off when selecting “Auto”.
Step 4
, Select the number of action type.
Step 5
, Click
to complete config.
3.3.2.9 PTZ Limit
PTZ limit function is used to set the movement area of the device, which makes the device move within area.
Step 1
,
Select “Setup > PTZ Settings > Function > PTZ Limit”.
The system will display the interface of “PTZ Limit”, which is shown in Figure 3.3-10:
Figure 3.3-10 PTZ Limit
Step 2
, Control camera direction; click
to set up X Axis Zero Point.
