Translation of the original operation manual
29
Airless 270_BAoDB_en_1405 • 0550022 • jw
Transport, installation and assembly
4.3
Assembly
WARNING
If assembly work is carried out by people who have not been
trained for this work, you endanger yourself and other people and
impair the safety and reliability of the equipment.
³
Electrical components must only be mounted by trained time-
served electricians – with all the other components, e.g. the
spray hose and the spray gun being assembled by trained
personnel only.
WARNING
Sources of ignition may result from assembly work (e.g. through
mechanical sparks, electrostatic charge, etc.).
³
Carry out all assembly work outside of areas with explosive
atmospheres.
³
Assemble the parts or fittings dismantled for transport purposes
before start up and in compliance with the intended use of the
system.
4.3.1 Mounting the wall bracket
The equipment can optionally
be mounted on a wall bracket.
Observe the weight of the
equipment (see Technical data)
and select suitable fastening
materials, taking into account
the wall structure.
Ensure a sufficient distance be-
tween suction elbow and floor
of at least 10 cm.
Fig. 8
Mounting the wall bracket
oor
min. 10 cm
