Translation of the original operation manual
15
Airless 270_BAoDB_en_1405 • 0550022 • jw
Safety
2.3
Information signs on the equipment
Information signs attached to the
equipment, like safety information
(see Fig. 1), refer to possible danger
areas and must be strictly observed.
They must not be removed from the
equipment.
Damaged and illegible information
signs must be replaced immediately.
Apart from this you should also read
and follow the safety notes in the
operation manual.
Fig. 1
: Safety Information
2.4
Safety features
WARNING
If one of the safety features is missing or not fully functional, the
operating safety of the equipment cannot be guaranteed!
³
If you discover any faults in the safety features or other defi-
ciencies on the equipment, stop operation of the equipment
immediately.
³
Only resume operation of the equipment after the fault has
been completely eliminated.
Safety features must be checked on the equipment:
³
before initial commissioning,
³
always before starting work,
³
after set-up work,
³
after all cleaning, servicing and repair work.
