30
Translation of the original operation manual
Airless 270_BAoDB_en_1405 • 0550022 • jw
Transport, installation and assembly
4.3.2 Assembling spray hose and spray gun
WARNING
Components that do not comply with the maximum permitted
operating pressure of the equipment can burst and cause serious
injury.
³
Check the maximum permitted operating pressure of the
material hose and the spray gun before assembly. It must be
greater than or equal to the maximum operating pressure of
the equipment as specified on the type plate.
³
Only use conductive material hoses.
All original material hoses from
WIWA
are conductive and
perfectly adapted to our equipment.
1.
Connect the spraying hose to
the material outlet on the high
pressure filter (see Fig. 9).
Fig. 9
Connecting spraying
hose to high pres-
sure
lter
2.
Connect the other end
of the spraying hose to
the spray gun (see Fig.
10).
Fig. 10
Spraying hose to gun (example)
