Translation of the original operation manual
11
Airless 270_BAoDB_en_1405 • 0550022 • jw
Safety
³
Material hoses and hose assemblies must comply with the
maximum working pressure, including the required safety
factor.
³
Material hoses must be leak tight and free of kinks, signs of
abrasion or bulges.
³
Hose connections must be tight.
2.2.2 Risks caused by the spray jet
WARNING
The material is discharged from the spray gun under very high
pressure. Due to its cutting effect the spray jet can cause severe
injuries by penetrating the skin or entering into the eyes.
³
Never point the spray gun at yourself, other persons or
animals.
³
Do not hold your fingers or hands in front of the spray gun!
³
Do not reach into the spray jet with your hands!
WARNING
Unintentional material release from the spray gun may cause
personal injury or damage to property.
³
Always secure the spray gun during every work break!
³
Always check that the safety mechanism on the spray gun
works before each use!
2.2.3 Hazard from electrostatic charging
WARNING
The high flow velocities associated with the Airless spraying
method may cause electrostatic charging.
Static discharges can cause fire and explosion.
³
Ensure that the equipment has been properly grounded out-
side of explosive atmosphere areas!
³
Also ground the object to be coated.
