12
Translation of the original operation manual
Airless 270_BAoDB_en_1405 • 0550022 • jw
Safety
³
Always use open containers!
³
Never spray solvents or materials containing solvent into
cone-top cans or drums with a bunghole!
³
Place the containers on a grounded surface.
³
Always use electrically conductive containers.
³
Avoid contact between spray gun and container wall.
³
Use only electrically conductive material hoses.
All original material hoses from
WIWA
are conductive and
perfectly adapted to our equipment.
³
Use only electrically conductive accessories/accessory parts.
WARNING
If the equipment is contaminated by material during operation,
the increased coating thickness can lead to electrostatic
charging. Static discharges can cause fire and explosion.
³
Clean the equipment immediately to remove any contamina-
tion.
³
Carry out cleaning work outside areas with explosive atmos-
pheres.
2.2.4 Hazards from hot/cold surfaces
CAUTION
The use of material heaters can cause the surfaces of the equip-
ment to become hot. Risk of burns.
³
Always wear protective gloves with lower arm protection
(gauntlet) when working with heated materials!
CAUTION
The air motor becomes very cold during operation. There is a
high risk of local frostbite.
³
The air motor should warm up to a temperature above 10 °C
before starting any work on the equipment.
³
Always wear suitable protective gloves!
