Wirepath Surveillance 750-PTZ-A-WH, Руководство по установке

Страница: 20 / 32

20
WPS-500/750-PTZ-A Installation Manual
4.6. Camera Options (Main Setup)
• SSDR
Samsung Super Dynamic Range optimizes lighting in the scene for an evenly-lit scene. The user has options for:
• Adjusting the SSDR level; from 1 to 15
• Dynamic Range; WIDE or NARROW
Highlight and press “Iris +” (“OPEN”) on the RETURN option to go back to the previous page.
• WHITE BAL
Adjust white balance settings. The user has options for:
• ATW (Auto Tracing White Balance)
• Manual; where RED and BLUE level may be adjusted from 1 to 1023
• AWC->SET (Auto White Balance Control)
• OUTDOOR
• INDOOR
• BACKLIGHT
Enable and configure backlight control or highlight control. The user has options for:
• BLC; which may be set to LOW, MIDDLE, or HIGH.
• HLC; which may be set to LOW, MIDDLE, or HIGH and Mask tone which may be adjusted from 1 to 15.
• MOTION DET
Enable and configure up to 8 motion detection areas so that colored squares highlight the areas when and where
motion occurs. The user has options for:
•
Motion detection sensitivity; which may be set to LOW or HIGH.
• Smart zoom; where the Start Zoom and Target Zoom may be adjusted from 1x to 12x for the WPS-500-PTZ-A and
from 1x to 37x for the WPS-750-PTZ-A.
• Dwell time; which may be adjusted from 5 seconds to 60 seconds.
• FOCUS
Allows the user to set focus modes AUTO, MANUAL, or ONE-PUSH. The user has options for:
• ZOOM TRACK; which may be set to AUTOTRACK, TRACK, or OFF.
• ZOOM SPEED; which may be set to FAST, SLOW, or MEDIUM.
• D-ZOOM (Digital Zoom); which may be set up to 16x.
• ZOOM POS INIT (Initial zoom position); which may be set to OFF, AUTO, or MANUAL (POS INIT from 1x to 12x for the
WPS-500-PTZ-A and from 1x to 37x for the WPS-750-PTZ-A).
• USER PRESET; which may be saved and cleared.
• LENS INIT (Lens initialization); which may be set to AUTO where the day of the week for lens initialization may be
selected or manual where the lens initialization is done immediately.