Wirepath Surveillance 750-PTZ-A-WH, Руководство по установке

Страница: 17 / 32

17
© 2014 Wirepath Surveillance
WPS-500/750-PTZ-A Installation Manual
4. OSD Setup Menu
4.1. Accessing and Operating the Setup Menu
• Call preset “95” in the PTZ controller to access the setup menu.
• Move the joystick up or down to navigate the menu. The on-screen arrow points to the selected option.
• To change settings, move the joystick left or right. If nothing changes, enter the sub-menu by pressing your PTZ
controller’s “Iris +” or “OPEN” command.
• Press your PTZ controller’s “Iris -” or “CLOSE” command to exit a menu.
4.2. Main Menu Overview
Navigate up or down using the PTZ joystick to make a selection. Press the “Iris +” (“OPEN”) button on the PTZ controller to
enter a sub-menu. Press the “Iris -” (“CLOSE”) button to exit the Main menu.
• LANGUAGE SETUP
Select the desired language from English or French by moving the joystick left or right.
• DOME INFORMATION
Use this menu to see the current camera settings. See section “4.3. Dome Information Menu Overview” on page 18.
• DISPLAY OPTIONS
Set up the display to show desired camera information. See section “4.4. Display Options Menu Overview” on page
18.
• CONTROL OPTIONS
Configure how the camera reacts to automatic and manual control. See section “4.5. Control Options Menu
Overview” on page 19.
• CAMERA OPTIONS
Configure the camera lens and sensor for achieving the best image quality. See section “4.6. Camera Options (Main
Setup)” on page 20.
• FUNCTION PROGRAMMING
Program and execute automated PTZ functions for monitoring and motion detection. See section “4.7. Function
Programming Menu Overview” on page 22.
• SYSTEM SETUP
Reset PTZ presets, camera settings, or restore the camera to default configuration. For the WPS-750-PTZ-A, IR setup is
also found in this menu. See section “4.8. System Setup Menu Overview” on page 28.