29
© 2014 Wirepath Surveillance
WPS-500/750-PTZ-A Installation Manual
5.
Short-cut Operations and Specifications
The preset positions below have been programmed with specific functions. These commands can be used to configure
camera control options by assigning the numbers to shortcut keys in a PTZ controller or entering them manually.
Preset #
Function
Call Preset
Save Preset
51
Pan-Tilt Control
Record line-scanning speed
Run cruise track
52
Start line-scanning
Set line-scanning starting point
53
-
Set line-scanning ending point
54
Camera Power*
On
Off
55
Background light compensation*
On
Off
56
Day/Night*
Auto
Color
57
Camera related OSD*
Camera menu On\Off
Camera function OSD On\Off
58
Digital zoom*
On
Off
59
Focus*
Auto
Manual
60
Iris*
Auto
Manual
61
White balance*
Auto
Manual
62
Indoor
Outdoor
63
ATW
One-push WB
79
Set line-scanning mode
Long distance
Short distance
80
Run pattern
Run pattern 1
81
Run pattern 2
82
Run pattern 3
83
Run vector
Run vector scan 1
84
Run vector scan 2
85
Run vector scan 3
86
Run vector
Run vector scan 4
87
Run vector scan 5
88
Run vector scan 6
89
Picture freeze*
On
Off
91
Dynamic preset point
Call dynamic preset point
94
Dome reset
Reset dome
95
Main menu
Call main menu
96
Set the auto flip
On
Off
101
Pan continuous scanning
On
5.1. How To Use Shortcut Codes
1. Enter the desired preset number into the PTZ controller, then
call
or
save
to execute the command. Example:
•
To change “White Balance” mode from “INDOOR” to “OUTDOOR”, enter preset number “62” and
save
the preset.
•
To change the setting back to “INDOOR”, enter preset number “62” and
call
the preset.
5.1.1. Preset and Shortcut Notes
•
Shortcut preset points (51-63 and 79-101) may only be used for the functions listed in the shortcuts table.
•
Preset position numbers 1-50, 64-78, and 102-165 may be used to set preset call positions (128 available in total).
•
Cruise Track (Preset 51):
When preset “51” is
saved
, the camera will auto-scan point by point from preset position “1”
to “16” (if they are assigned), pausing for 2 seconds at each position. If no presets are assigned, the camera will not
track.
•
Line Scanning (Presets 51-53):
The camera will scan between two specified points. Set the start and end point by
positioning the camera as desired and
saving
presets “52” and “53”.
•
Line scanning speed may be set by moving the camera for at least three seconds, then
calling
preset “51”.
•
Provided the start and end points have been set,
calling
preset “52“ starts the line scanning from the start point to
the end point.
•
Pan Continuous Scanning (Preset 101):
Move the camera at the desired speed for at least 3 seconds, then
call
preset
“101” to begin panning at the speed and in the direction that the camera view was moved.
Содержание 750-PTZ-A-WH
Страница 32: ...141223 1121 2014 Wirepath Surveillance...
