Wintriss SmartPAC2, Руководство пользователя

Страница: 132 / 383

SmartPAC 2 User Manual 1126700
Initialization Mode 4-35
1.
Select SETUP NETWORK on the Main Initialization Menu to display the Network Setup
Utility screen.
2.
With the highlight bar on E-MAIL FUNCTION, press ENTER to toggle the setting to
ENABLED.
3.
Press RESET to return to the Main Initialization Menu.
If you don’t plan to use E-mail, set the E-MAIL FUNCTION item to DISABLED.
SMARTVIEW FUNCTION
(INITIALIZATION – SETUP NETWORK – SMARTVIEW FUNCTION)
SmartPAC 2’s SmartView function enables individuals in your SmartPAC 2 network to view
the operation of each press in your pressroom from a remote location. (Information about
setup and operation of SmartView is provided in Appendix C.) If you plan to use SmartView,
do the following to enable this function:
1.
With the highlight bar on the SMARTVIEW FUNCTION item on the Network Setup
Utility screen, press ENTER to toggle the setting to ENABLED.
2.
Press RESET to return to the Main Initialization Menu.
If you don’t plan to use SmartView, set the SMARTVIEW FUNCTION item to DISABLED.
SETUP E-MAIL
(INITIALIZATION – SETUP NETWORK – SETUP E-MAIL)
If you have enabled the SmartPAC 2 E-mail function, you should use the SETUP E-MAIL
item on the Network Setup Utility screen to enter E-mail settings. Settings are made on the
Setup E-mail screen, which is shown in Figure 4-27, page 4-36.
To set up E-mail, do the following:
1.
Select SETUP E-MAIL on the Network Setup Utility screen. The Setup E-Mail screen
displays.
Consult your network administrator when setting up SmartView.
• Consult your network administrator when setting up e-mail.
• Use SmartView remote viewing utility (see previous item) to set up e-mail messages and
recipients.
NOTICE
NOTICE