page 7 of 24
Document: U99_001
3.2.2
Unpacking
Already during unpacking of supplied product make sure that serial number stated on order confirmation is the same as
stated on delivery note and name plate of. The shipment must be checked for completeness. The goods should be
preferably unpacked on site, sothat unintended and unforeseeable contamination is avoided. Also make sure, that the
product is not damaged during unpacking and that no parts of packing material remain at the product. Packaging waste
must be disposed in a way that no hazards arise for personal (i.e. stumbling or any other hazards) and environment
Pay attention to
9.4 Transport, Intermediate storage and assembly / installation
3.3 Preservation
3.3.1
Durability
In regular case, the preservation is for a period of time of approximately 3 months
.
We normally use preservation which is physiologically safe. For any additional information, please, apply to manufacturer.
3.3.2
Continued preservation
For a longer period of intermediate storage the preservation has to be checked and, if necessary, supplemented by
commercial products, which do not affect the used materials.Especially the parts, which are in contact with other parts,
must be protected against corrosion sothat it do not stick together. For more information, please, contact the manufacturer.
3.3.3
Removal of preservation
Normally the perservation is washed-off during trial service of the pump/ plant. A removal is not necessary.
3.4 Intermediate storage
Intermediate storage in an environment with high humidity and alterating temperatures must be avoided.
Deviations must be cleared up with manufacturer. Condensation water may attack metal parts in contact (e.g. bearings)
and impact quality of lubricating greases.In case of delivery with internal combustion engine, make sure, that cooling
systems and motor are protected from frost damage.
The warranty claim expires, if storage instructions are disregarded!
3.5 Return consignment
Return drained pump, only!
If hazardous liquids were pumped, decontamination of pump is necessary before returning it.
For return consignment only use preservation and transport packing prescribed by manufacturer.
Hazards by liquids which are dangerous to health and environment
Pay attention to safety instructions in this manual as well as instructions of operator and locally
applicable regulations. To be in suitable, personal protective gear is obligatory.
If liquids are pumped, which are hazardous for persons and environment, precautions have to be
taken, which ensure safe collecting of leakage and its proper disposal.
Disregarding of instructions for return consignment can result in loss of any claim damages and
warranty.
3.6 Disposal
The operator is responsible for proper disposal of the product.
For proper disposal, the following procedure is helpful:
Drain medium and, if necessary, collect for separate disposal. Decontaminate product, if necessary.
Disassemble pump/aggregate
If liquids are pumped, which are hazardous for health and environment, clean contaminated parts of
pump/aggregate
Separate different materials
Proper disposal of different components according to local applicable regulations.
Hazards by liquids which are dangerous for health- and environment
The safety instructions in this manual, of operator and local applicable regulation must be observed.
To be in suitable, personal protective gear is obligatory.
If liquids are pumped, which are hazardous for persons and environment, precautions have to be
taken, which ensure safe collecting of leakage and its proper disposal.