Winter MULTIMAX 300, Руководство по эксплуатации, Страница: 28 / 74

M ULTIMAX 300
Chapter 3: OPERATION
22
3-6 ADJUSTING THE HEIGHT OF THE
PRESSURE ROLLERS
Adjust the pressure rollers (housing) by keeping on pressing the pressure rollers UP
or DOWN button until the desired height is reached. The height of pressure rollers
pointed on the scale should be less 2~3mm than the real thickness of the wood to be
cut.
E.g. If the thickness of wood to be cut is 100mm, the height of pressure rollers should
be adjusted to the position of the scale indicating 97~98mm. (To prevent screws
of pressure plate from being broken when the wood is in irregular shape, the
height of pressure rollers should be raised to the position of the scale indicating
110mm, then lower to 97~98mm.)
Notice:
When the thickness of the same wood piece is not even or over-bent, it will cause
the feeding not smoothly and make the pressure springs being damaged easily.
Therefore, the tolerance of thickness and the bend has to be within
±
3mm.