Winter MULTIMAX 300, Руководство по эксплуатации

Страница: 9 / 74

MULTIMAX 300
Chapter 1: INTRODUCTION
3
Planks which are warped lengthwise should be placed with the concave side
face down on the caterpillar chain.
Suitable circular woodcutting blades should always be used. The blades
should be checked regularly for bluntness, crack, and accumulation of
sawdust.
Make certain that blades are installed with the teeth pointing in the same
direction as the rotation of saw arbors turns.
Checks should be made regularly to ensure that there are no foreign objects
jammed in the gaps between the feed chain. An air gun should be used daily
to remove sawdust from these gaps.
Make certain that the power of the machine is disconnected from the power
source before effecting any cleaning, lubrication, maintenance, repair,
adjustments, or part replacements.
The operator should never leave the machine unattended when in use.
Similarly, after switching off the machine, the operator must be certain to
wait until the machine comes to a complete standstill before walking away.